BWPSW - COSMOLUBE 615

  • MSDS: BWPSW
  • Manufacturer: E F HOUGHTON AND CO
  • Product Name: COSMOLUBE 615
  • National Stock Number: 9150-01-018-8960
Product Identification

Product ID:COSMOLUBE 615
MSDS Date:10/06/1992
FSC:9150
NIIN:01-018-8960
MSDS Number: BWPSW

Responsible Party
E F HOUGHTON & CO
VALLEY FORGE, PA 19482
US

Emergency Phone: 215-666-4105

Info Phone: 215-666-4105

Preparer: ROBERT E. WILLIAMS

Cage: 73227

Contractor
HOUGHTON INTERNATIONAL INC
930 VALLEY FORGE, PA 19482-0930 US

Telephone: 610-666-4105

Cage: 73277

Ingredients

DIPHENYLAMINE; (DIPHENYL AMINE)

CAS: 122-39-4

RTECS: JJ7800000

Fraction By Weight: <1%

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: NORMAL APPLICATION
OF PRODUCT AS A GREASE OR LUBRICANT SHOULD NOT CREATE INHALATION
EFFECTS OR HAZARD. SKIN: MAY BE A MILD IRRITANT TO SENSITIVE SKIN
ON PROLONGED CONTACT. EYES: MIL D IRRITANT. INGESTION: NO
SIGNIFICANT EFFECTS KNOWN. CHRONIC: UNKNOWN FOR THIS PRODUCT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) . SKIN: WASH WITH SOAP AND WATER.
EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. CONSULT MD. INGEST:
CONSULT M D. PRODUCT CONTAINS MOSTLY SILICONE COMPOUND.

Fire Fighting

Flash Point Method:COC
Flash Point:>400F,>204C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SHOVEL INTO A CLEAN CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NOT REQUIRED. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL MECHANICAL TYPE VENTILATION IS SATISFACTORY.
Protective Gloves:IMPERVIOUS OR RUBBER.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Vapor Pres:NIL
Spec Gravity:0.927
Solubility in Water:INSOLUBLE
Appearance and Odor:PINKISH-GRAY GREASE; BLAND ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL; OXIDES OF CARBON

Disposal

Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS FOR
DISPOSAL OF LUBRICATING GREASES. MAY BE INCINERATED UNDER
CONTROLLED CONDITIONS. NOT CONSIDERED A POLLUTANT; EFFECTIVE WASTE
DISPOSAL METHODS SHOULD BE UTILIZED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.